Kataloge | Zäune | Fences in spot-welded and chain link rolls | Tubular posts and mainstay for fencing mesh rolls - EXPORT series | ​Hot-dip galvanised or painted tubular post with stainless steel wire holders 2 holes base to be bolted on

Hot-dip galvanised or painted tubular post with stainless steel wire holders 2 holes base to be bolted on

• Supplied with aluminium cap
• Packs of 25 pieces

The posts to be bolted are divided into two categories.
The first category has a rectangular plate with two holes placed on the long side in line with the area being fenced. The maximum height for this series is 3 working metre.
The second category has a square plate with four holes and is better suited to supporting the weight of heavier fences. The four holes also allow plastic rings to be placed between the installation base and the post plate to insulate it or absorb vibrations from the road surface.
The maximum height for this series is 4.5 working metre.
The mainstays for posts to be bolted are all angled at 45°. There are two types of mainstay: the first has a longitudinal plate with one hole only while the second has a cross plate with two holes. The latter is better suited to very tall posts to be bolted in with “4-holes”. 

HP-T base120 x 60/90 x 10 mm - 2 holes ø 12 mm