Catalogs | Fences | Plastic fences | FlatFix series plastic fences | Uprights for plastic fences
FlatFix series
Uprights for plastic fences
FlatFix is produced up to a height of 160 cm with 34 x 44 x 1.5 mm vertical rectangular pickets, reinforced internally by a tube in recycled PVC. Above that height, the internal reinforcement consists of aluminium profiles. In both cases, the support rails,, 34 x 44 x 1.5 mm, are in PVC, reinforced internally with galvanised steel. The uprights up to a height of 100 cm measure 34 x 44 x 1.5 mm. Above this height, they measure 54 x 44 x 2.0 mm. They all have internal reinforcem
The gates recommended for FlatFix are those from the PoleFix series.
• Upright section 34 x 44 x 1.5 mm up to panel height 100 cm
• Galvanised steel reinforcement 30 x 40 x 3.0 mm
• Upright section 54 x 44 x 2.0 mm for panel height from 120 cm
• Galvanised steel reinforcement 50 x 40 x 2.0 mm
Base 120 x 120 x 8 mm
4 holes ø 11 mm
Available models
| Item | Upright H tot. mm | kg per piece | kg per pallet |
|---|---|---|---|
| Uprights to be set in concrete - pallet of 10 pcs. | |||
| FTC-P 120 xx | 1200 | 3.00 | 30 |
| FTC-P 140 xx | 1400 | 3.50 | 35 |
| FTC-P 160 xx | 1600 | 4.00 | 40 |
| FTC-P 180 xx | 1800 | 4.50 | 45 |
| FTC-P 200 xx | 2000 | 5.00 | 50 |
| Uprights with rod Ø 17 mm to be set in concrete - pallet of 10 pcs. | |||
| FTP-P 115 xx | 1150 | 3.11 | 31.1 |
| FTP-P 135 xx | 1350 | 3.62 | 36.2 |
| FTP-P 155 xx | 1550 | 4.12 | 41.2 |
| FTP-P 175 xx | 1750 | 4.62 | 46.2 |
| FTP-P 195 xx | 1950 | 5.12 | 51.2 |
| Uprights to be bolted on - pallet of 10 pcs. | |||
| FTT-P 101 xx | 1008 | 3.72 | 37.2 |
| FTT-P 121 xx | 1208 | 4.22 | 42.2 |
| FTT-P 141 xx | 1408 | 4.72 | 47.2 |
| FTT-P 161 xx | 1608 | 5.22 | 52.2 |
| FTT-P 181 xx | 1808 | 5.72 | 57.2 |
