Catalogs | Fences | Fences in spot-welded and chain link rolls | Tubular posts and mainstay for fencing mesh rolls - EXPORT series | Hot-dip galvanised or painted angled post with stainless steel wire holders base with 4 holes to be bolted on
HP-S4
Hot-dip galvanised or painted angled post with stainless steel wire holders base with 4 holes to be bolted on
Hot-dip galvanised or painted angled post with stainless steel wire holders base with 4 holes to be bolted on
• Supplied with aluminium cap
The posts to be bolted on have been designed for installation on pre-existing walls on sloping ground.
This system means you do not have to make large holes to set them in concrete and ensures the post is correctly angled, even if the slope changes.
The system is simple but effective and uses a rod on which the post is fixed, which is “free” to be angled as required, plus a pre-drilled wing in which a self-tapping retention screw is placed, after drilling a pilot hole in the post.
For safety reasons, the maximum height for this series is 2.5 working metre.
The mainstays are also jointed in the same way, but do not have fastening wings. Their stability is ensured by the tension exerted by the guide wires and the posts attached to them.
HP-S4 Base
120 x 120 x 10 mm 4 holes ø 12 mm
mounted on a post with a maximum height of 2.5 metre
To order the product in the required finish or paint, replace the “xx” in the code with the colour suffix as shown in the table.
Available models
| Item | Height cm | Fairlead N. | For mesh H cm | Kg x piece | Pieces x pallet | kg per pallet |
|---|---|---|---|---|---|---|
| Post Ø 33 mm - Thickness 2.0 mm | ||||||
| HP3 065 S4 xx | 65 | 2 | 60 | 2.40 | 50 | 120 |
| HP3 085 S4 xx | 85 | 3 | 80 | 2.70 | 50 | 135 |
| HP3 095 S4 xx | 95 | 3 | 90 | 2.85 | 50 | 143 |
| HP3 105 S4 xx | 105 | 3 | 100 | 3.00 | 50 | 150 |
| HP3 125 S4 xx | 125 | 3 | 120 | 3.31 | 50 | 166 |
| HP3 130 S4 xx | 130 | 3 | 125 | 3.39 | 50 | 170 |
| HP3 155 S4 xx | 155 | 3 | 150 | 3.77 | 50 | 189 |
| HP3 180 S4 xx | 180 | 3 | 175 | 4.15 | 50 | 208 |
| HP3 185 S4 xx | 185 | 3 | 180 | 4.23 | 50 | 212 |
| HP3 205 S4 xx | 205 | 4 | 200 | 4.53 | 50 | 227 |
| Post Ø 42 mm - Thickness 2.5 mm | ||||||
| HP4 065 S4 xx | 65 | 2 | 60 | 2.98 | 50 | 149 |
| HP4 085 S4 xx | 85 | 3 | 80 | 3.47 | 50 | 174 |
| HP4 095 S4 xx | 95 | 3 | 90 | 3.71 | 50 | 186 |
| HP4 105 S4 xx | 105 | 3 | 100 | 3.96 | 50 | 198 |
| HP4 125 S4 xx | 125 | 3 | 120 | 4.45 | 50 | 223 |
| HP4 130 S4 xx | 130 | 3 | 125 | 4.57 | 50 | 229 |
| HP4 155 S4 xx | 155 | 3 | 150 | 5.17 | 50 | 259 |
| HP4 180 S4 xx | 180 | 3 | 175 | 5.78 | 50 | 289 |
| HP4 185 S4 xx | 185 | 3 | 180 | 5.91 | 50 | 296 |
| HP4 205 S4 xx | 205 | 4 | 200 | 6.39 | 50 | 320 |
| HP4 230 S4 xx | 230 | 4 | 225 | 7.00 | 50 | 350 |
| HP4 255 S4 xx | 255 | 5 | 250 | 7.61 | 50 | 381 |
| Post Ø 48 mm - Thickness 2.5 mm | ||||||
| HP5 065 S4 xx | 65 | 2 | 60 | 3.22 | 50 | 161 |
| HP5 085 S4 xx | 85 | 3 | 80 | 3.78 | 50 | 189 |
| HP5 095 S4 xx | 95 | 3 | 90 | 4.07 | 50 | 204 |
| HP5 105 S4 xx | 105 | 3 | 100 | 4.35 | 50 | 218 |
| HP5 125 S4 xx | 125 | 3 | 120 | 4.91 | 50 | 246 |
| HP5 130 S4 xx | 130 | 3 | 125 | 5.00 | 50 | 250 |
| HP5 155 S4 xx | 155 | 3 | 150 | 5.75 | 50 | 288 |
| HP5 180 S4 xx | 180 | 3 | 175 | 6.45 | 50 | 323 |
| HP5 185 S4 xx | 185 | 3 | 180 | 6.59 | 50 | 330 |
| HP5 205 S4 xx | 205 | 4 | 200 | 7.15 | 50 | 358 |
| HP5 230 S4 xx | 230 | 4 | 225 | 7.85 | 50 | 393 |
| HP5 255 S4 xx | 255 | 5 | 250 | 8.41 | 50 | 421 |
