catalogues | Clôtures | Gates

The relevant gates, both pedestrian and driveway, are shown here to complete the fences. The range also includes sliding gates. The first part of the chapter is dedicated to the Junior series, for use with rolled fencing. Gates from the Export series, which are sturdier and hot-dip galvanised, are also available for these fences, especially those with galvanised chain links. The gates dedicated to all the other types of fences are shown afterwards.
All the gates can be made to measure or have different widths for the two leaves. For example, they can incorporate a pedestrian gate and a driveway gate side by side which share a single weight-bearing central post. The gates should always be anchored to the ground by setting the uprights in concrete. In some cases, lighter gates, with maximum heights up to 150 centimetres, can be anchored with uprights bolted onto a four-hole plate. Our technical department can advise you on the best solution.
The pedestrian gates do not require CE marking, but they are nevertheless tested to guarantee their resistance to wind load according to the EN12444 test standard.
The double leaf driveway gates and the sliding doors comply with the EN 13241 standard and therefore have the CE mark.