catalogues | Clôtures | Gates | informations, accessories and components for gates | Gate uprights to be bolted on

Gate uprights to be bolted on

Base 120 x 120 x 10 mm – 4 holes ø 11 mm

It is possible to produce gates with uprights that can be bolted on. The weight and height, however, must be limited for this solution. The maximum weight is 30 kg and the height should not exceed 150 cm. Moreover, the load-bearing upright must be anchored with a bracket or through-bolt to a wall. If there is no wall, it will be necessary to install a mainstay, firmly anchored to the ground.
The plates can be centred or off-centre, both on the right and left, as shown in the detailed image. When placing the order, specify the type required by adding the suffix.
For further information, please contact our technical department.