catalogues | Clôtures | Gates | Pedestrian gates | GrigliaFix pedestrian gate
GS A/B/C
GrigliaFix pedestrian gate
The GrigliaFix series gates are made of square-section tubes. The GR series grid is used for the infill (see page 3.142). On request, the other grids in chapter 3 can be used at a small surcharge. The standard finishes are hot-dip galvanising and RAL 6005 Green.
GrigliaFix pedestrian gate with widths of 1.1 - 1.5 - 2.1 metre
• Square-section gate leaf tube 50 x 50 x 2.0 mm- cut at 45°
• Square-section upright 50 x 50 x 2.0 mm - 80 x 80 x 2.0 mm
• Mesh infill dimensions 62 x 132 mm
• Reversible hanging for RH or LH opening
• Adjustable hinges +/- 30 mm
• The gate is supplied with a black plastic handle
• The distance of the gate leaf from the ground is 100 mm
• Epoxy powder coating on the base
To order the product in the required finish or paint, replace the “xx” in the code with the colour suffix as shown in the table.
