catalogues | Clôtures | Gates | Pedestrian gates | Junior series pedestrian gate
JS A/B/C/D/E
Junior series pedestrian gate
The Junior series gates have the frame and uprights in square-section tubes with a suitable thickness, while maintaining an overall lightweight appearance. The infill is made of square spot-welded wire mesh. There are two finishes available: electro-galvanising which will be coated by the customer or epoxy powder coating.
Junior series pedestrian gate with widths of 1.0 - 1.2 - 1.4 - 1.7 - 1.9 metre
• Gate leaf tube 40 x 40 x 2.0 mm - cut at 45°
• Square-section upright tube 50 x 50 x 2.0 mm - 80 x 80 x 2.0 mm
• Mesh infill 50 x 50 mm -Wire Ø 4 mm
• Reversible hanging for RH or LH opening
• Adjustable hinges +/- 30 mm
• The gate is supplied with a black plastic handle
• The distance of the gate leaf from the ground is 100 mm
• Epoxy powder coating on the base
The Junior series gates have the frame and uprights in square-section tubes with a suitable thickness, while maintaining an overall lightweight appearance. The infill is made of square spot-welded wire mesh. There are two finishes available: electro-galvanising which will be coated by the customer or epoxy powder coating.
To order the product in the required finish or paint, replace the “xx” in the code with the colour suffix as shown in the table.
