catalogues | Clôtures | Gates | Pedestrian gates | StiroFix series pedestrian gate

The StiroFix series gates are made of the same profiles as the corresponding panels. The infill consists of one or two panels overlaid with diamond pattern expanded sheet metal.
There are two standard heights. The lower height is suitable for the fence panel when it is installed at ground level (it must be set in concrete or have a plinth when the uprights are set in concrete). The second, with a T-shaped horizontal mid section rail, is the correct height for a fence installed on a 50 centimetre wall. Gates of different heights can be produced to adapt to the height of the support wall. 

StiroFix series pedestrian gate with widths of 1,2 - 1,8 - 2,3 metre

• L-shaped gate leaf tube 25 x 28 x 1.5 mm - cut at 45°
• Square-section upright tube 40 x 40 x 2.0 mm - 80 x 80 x 2.0 mm
• Diamond pattern expanded sheet metal infill 110 x 40 x 1.5 mm
• Indicate RH or LH opening in the order
• Adjustable hinges +/- 30 mm
• Supplied with black plastic handle
• The distance of the gate leaf from the ground is 100 mm
• Epoxy powder coating on the base