catalogues | Clôtures | Fences in spot-welded and chain link rolls | Tubular posts and mainstay for fencing mesh rolls - EXPORT series | ​Hot-dip galvanised or painted tubular mainstay for posts to be bolted on with 1-hole base or 2-hole base

Hot-dip galvanised or painted tubular mainstay for posts to be bolted on with 1-hole base or 2-hole base

• Supplied with 45° angle aluminium pointed cap
• Packs of 25 pieces

The mainstays to be bolted on are made of extra-thick tube and therefore, strengthen the stability of the posts. This is true both when laying out the fencing mesh and tightening the longitudinal support wires.
Similar to the ones to be set in concrete, the mainstays are secured to the posts by a die-cast aluminium pointed cap that slots into the post via a hole to be drilled on-site.
The mainstay is bolted on via a plate with holes in it, welded at 45° to its base.The finish is applied to the mainstays to be bolted on after the base has been welded. They can be supplied both with a hot-dip galvanised or epoxy powder paint finish.

HS/T Base
120 x 60 x 10 mm
1 hole ø 12 mm

HS/T2 Base
120 x 60 x 10 mm
2 holes ø 12 mm